Shaker Cards
May's project of the month is compliments
of Stamp Artist Mieke Mulder!
|
SUPPLIES
Cardstock - one double card and one single card for each shakercard.
Clear acetate
Double Sided sticky tape or sheet( small strips about 1/4 inch)
Double Sided sticky, thin, foam tape(small strips about 1/6 inch)
tape
confetti or other fillers
stamps
ink |
GENERAL
INSTRUCTIONS
Stamp if desired the front of your double card.
Make a window or take a pre-cut double card
Mark with a pencil this window at the single card by putting
this behind your window at the inner side of your double card.
Stamp between these marks on your single card. Cut
a piece of acetate a little larger then your window and attach
this with tape behind your window opening at the back of your
front card.
Take good care you can't see your tape through the window front.
You're still working at the back of your front card!!!
Place at all sides small strips of dbs.sticky sheet or tape. Don't
remove the protection.
Now, still at the same side, place round the window opening small
strips of double sided
sticky foam tape. Don't remove the protection sheet and take
care you can't see this tape through your window front. |
Stamp Artist - Mieke Mulder
Images from CowTown
Stamps |
Put confetti on the acetate. Remove
the protection of the foam tape and attach your single card,
this way the image can look through the window opening!
At last you remove the protection of the dbs. sticky tape and
press the sides of the single card to it.
That is all, have fun making your own shaker card. |
|
"Ducky behind piano"
Stamp Artist - Mieke Mulder
Images from My Heart Stamps For You. |
Cut out a
square at the front of your double card.
Stamp the saying" Hope Your Day Is Just Ducky!"
Mark your window at the single card.
Stamp the Ducky between the marks.
Attach the acetate with tape at the inside of your
double card, at the back of the window.
All around place double sided sticky tape/sheet at the same side.
Now put the double sided sticky foam tape around your window,
use small strips( !/6 inch).
Put confetti on the acetate.
Remove the protection and place your card at the foam tape.
Now remove the protection of the double sided sticky tape and
put the sides onto this. |
Click
Here to see more shakers card creation
by Stamp Artist Mieke Mulder
|
|
